Bonding Agents

PacBond™ is a 5th generation light-cure, one-component dental bonding agent designed for both direct and indirect bonding applications. Its clinically proven technology provides the highest level of protection against microleakage, and reduces post-operative sensitivity.

Shotbond is a self etch dual curing single mix bonding system,7th generation all in one bonding system,Single dose etching, primer, bonding, Easy to use, simple, hygenic, High adhesion values on enamal (24 Mpa*) & dentine (23 Mpa*), No post operative sensitivity, No mess, no spilling application, No additional devices required.

GINGIBond is a 5th generation light-cured, one-component dental bonding agent designed for both direct and indirect bonding applications. Its clinically proven technology provides the highest level of protection against micro leakage, reduces post-operative sensitivity, and sustains high bonding strength for a variety of surfaces (wet or dry). Penetrates deep into dentin tubules for a long-lasting bond, Clinically proven total-each adhesive provides a strong and durable bond.

GINGIBond Plus is a single component self-etch dental adhesive. Simple to use and universal in application. Nano-filled for better enamel and dentin bond strength, stress absorption, and longer shelf life. Universal to a variety of surfaces and substrates for direct and indirect applications. It can use with self-etch, selective etch, and total-etch techniques. Penetrates deep into dentin tubules for a long-lasting bond. Excellent bond with self-etch, selective etch, and total-etch techniques.

PacBond One is a Single Component Self-Etch Dental Adhesive. Simple to use and universal in application. Nano-filled for better enamel and dentin bond strength, stress absorption and longer shelf life. Universal to a variety of surfaces and substrates for direct and indirect applications. Can be used with self-etch, selective-etch, and total-etch techniques.

Fast setting, Cost effective, Produces fine smooth castings, Leaves no residue in the investment mold after burnout, Available in Red

OptiBond S  is a single-component dental adhesive designed for both direct and indirect bonding applications. It is 15% filled with the same 0.4 micron filler found in the Kerr Point 4 composite.

SUPPRA Bond A Plus, Light-Cure adhesive system for enamel and dentin. Best performance at any moisture level of dentin. Higher stability and resistance to adhesive film due to the presence of treated silica nanoparticles. Suitable for direct restorations with composites and light curing glass ionomer cements, adhesive luting posts/cores, crowns, onlays/inlays and veneers. BPA Free. # 1 clear adhesive system on the dental marcket. Primary Market : USA Market.

Monobond Etch & Prim is a Self-etching glass-ceramic primer. Etching with hydrofluoric acid is unnecessary as all glass-ceramics are etched Short process requiring only.

OptiBond Solo Plus Bottle is a total-etch, single-component dental adhesive for virtually every clinical application. Ethanol-based, 15 % filled with Kerr’s proprietary 0.4μm filler, Solo™ Plus actually reinforces dentine tubules at much greater depths than unfilled or nano-filled systems.

Prelude Adhesive is part of the Prelude Adhesive System which is a nanohybrid, light cured, self-etch or total-etch dental adhesive ideal for bonding composite to dentin, enamel, porcelain and metal. Its low film thickness does not interfere with the fit of indirect restorations.

CLEARFIL SE BOND is a simplified, light-cure bonding system containing a water-based primer. The procedure time with CLEARFIL SE BOND is significantly reduced, while providing enhanced bond strength and sealing properties — and, it can be used with all light-cured restoration. The unique “Outer Case” delivery system allows direct finger control of the contents.

Kuraray, after inventing the self-etching technique with CLEARFIL LINER BOND 2 in 1993, has surpassed their universally accepted total-etch technology with a new product — a new-generation self-etching primer and bonding system called CLEARFIL SE BOND, CLEARFIL SE BOND is a simplified, light-cure bonding system containing a water-based primer. The procedure time with CLEARFIL SE BOND is significantly reduced, while providing enhanced bond strength and sealing properties — and, it can be used with all light-cured restoration. The unique “Outer Case” delivery system allows direct finger control of the contents.

Ivoclean Universal Cleaning Paste, 5 g Bottle. Effectively cleans bonding surfaces or prosthetic restorations immediately prior to luting for optimum adhesion cutting and handling. Works in 20 seconds before being rinsed and dried away. Compatible with all types of restorative materials including ceramics, alloys and composites.

Easy to use: dead pack dough in less than one minute of mixing, Won’t stick to fingers after mixing: easy to manipulate on the model, Accurate and dimensionally stable: the dough will stay in place on the model and won’t distort after curing, Easy to trim: produces a hard, durable plastic tray that won’t gum-up burs when trimming, Available only in blue powder, clear liquid

CLEARFIL SE BOND is a simplified, light-cure bonding system containing a water-based primer. The procedure time with CLEARFIL SE BOND is significantly reduced, while providing enhanced bond strength and sealing properties — and, it can be used with all light-cured restoration. The unique “Outer Case” delivery system allows direct finger control of the contents.

Fast setting, Cost effective, Produces fine smooth castings, Leaves no residue in the investment mold after burnout, Available in Red

This resin-based adhesive system is simple and easy, self-etching, light-cure bonding agent that soothes dentin on contact and virtually eliminates postoperative sensitivity.

Fast setting, Cost effective, Produces fine smooth castings, Leaves no residue in the investment mold after burnout

Quick ceramic/metal bracket cure. Extended working time allows precise bracket placement. Immediate bond strength allows archwire to be tied in immediately following cure.

Prelude Primer is part of the Prelude Adhesive System which is a nanohybrid, light cured, self-etch or total-etch dental adhesive ideal for bonding composite to dentin, enamel, porcelain and metal. Its low film thickness does not interfere with the fit of indirect restorations.

This primer and adhesive is part of the Prelude Adhesive System which is a nanohybrid, light cured, self-etch or total-etch dental adhesive ideal for bonding composite to dentin, enamel, porcelain and metal. Its low film thickness does not interfere with the fit of indirect restorations.

Clinically proven. Universally accepted, industry-standard total-etch adhesive, Strong, durable bond ,  15% filled material penetrates and reinforces dentin tubules to provide a long-lasting bond, Delivery options, Choose 5 ml bottle or convenient Unidose® delivery, OptiBond® Solo Plus™ is a single-component dental adhesive designed for both direct and indirect bonding applications. It is 15% filled with the same 0.4 micron filler found in the Kerr Point 4 composite. The filler not only reinforces the hybrid zone but also penetrates the dentin tubules, creating a true "structured bond" not found in unfilled or even "nano" filled dental adhesive systems.

Clinically proven. Universally accepted, industry-standard total-etch adhesive, Strong, durable bond ,  15% filled material penetrates and reinforces dentin tubules to provide a long-lasting bond, Delivery options, Choose 5 ml bottle or convenient Unidose® delivery, OptiBond® Solo Plus™ is a single-component dental adhesive designed for both direct and indirect bonding applications. It is 15% filled with the same 0.4 micron filler found in the Kerr Point 4 composite. The filler not only reinforces the hybrid zone but also penetrates the dentin tubules, creating a true "structured bond" not found in unfilled or even "nano" filled dental adhesive systems.

Ideal for both direct and indirect applications with virtually no post-operative sensitivity and can be used on all surfaces without any extra primer.

Fast setting, Cost effective, Produces fine smooth castings, Leaves no residue in the investment mold after burnout, Available in Red

Concentrate used to dissolve alginate from impression trays and instruments, Powder Concentrate 650g